Product display
Three-axis cylinder/basic TPM series
With scale, with windows, to achieve the numerical management of traffic, reduce operating hours, reduce setting errors.
Keyword:
Here is the placeholder text
Product Details
Ultra-low starting pressure
Guide rod and bearing clearance less than 0.04MM
End plate non-rotation precision angle is extremely small
Good consistency of different batches with strong side load resistance
TPM plain bearing series
Performance coverage
Plain bearings and rolling bearings
You only need to choose TPM series three-axis cylinder to meet the performance requirements such as high strength and high precision, greatly reducing your company's material coding and design selection time
- Product Features
- Product Specifications
- Installation and use
- Order Code
- Functional Symbols
-
- Commodity name: Three-axis cylinder/basic TPM series
Starting pressure lower than 0.05Mpa Guide rod and bearing clearance less than 0.04mm The end plate does not rotate the precision is extremely low Strong resistance to side load
Ultra-low starting pressure
Guide rod and bearing clearance less than 0.04MM
End plate non-rotation precision angle is extremely small
Good consistency of different batches with strong side load resistance
TPM plain bearing series
Performance coverage
Plain bearings and rolling bearings
You only need to choose TPM series three-axis cylinder to meet the performance requirements such as high strength and high precision, greatly reducing your company's material coding and design selection time
-
Specifications
Cylinder diameter (mm)
12
16
20
25
32
40
50
63
Action mode
Double-acting type
Working medium
Air (filtered by filter screen above 40um)
Guaranteed pressure resistance
1.5MPa
Maximum use pressure
1.0MPa
Minimum use pressure
0.06MPa
0.05MPa
Ambient temperature and working temperature
-10~70 ℃ (but not frozen)
Use piston speed
30~500mm/s
Buffer
Gas buffer on both sides
Stroke length tolerance
5g
Standard stroke
Cylinder diameter (mm)
Standard stroke (mm)
12,16
10,20,30,40,50,75,100,125,150,175,200,250
20,25
20,30,40,50,75,100,125,150,175,200,250,300,350,400
32~63
25,50,75,100,125,150,175,200,250,300,350,400
The system of intermediate stroke
corresponding method
Gasket mounting type
Install gasket in standard stroke cylinder
012~032: corresponding to every 1mm stroke
040~063: corresponding to every 5mm stroke
Model
Please refer to the model representation method of the standard model
Suitable stroke (mm)
012,016
1~249
020,025,032
1~399
040,050,063
5~395
Examples
Model: TPM20X29S
Install a 1mm thick gasket on the TPM20X30S with the same dimensions as the TPM20X30S.
-
1. When the load changes during work, the cylinder with abundant output force should be selected;
2. In high temperature or corrosive environment, should choose the corresponding high temperature or corrosion resistant cylinder;
3. In the case of high humidity, dust, or water droplets, oil mist, welding slag, etc., the cylinder should take corresponding protective measures;
4. Before the cylinder is connected to the pipeline, the debris in the pipeline must be clear to prevent impurities from entering the cylinder;
5. The medium passing through the cylinder should be filtered by a filter element above 40μm before use;
6. The lateral load on the cylinder during operation should not exceed the allowable value of the sample to maintain the normal operation and service life of the cylinder;
7. In the low temperature environment, anti-freezing measures should be taken to prevent the moisture in the system from freezing;
8. When the cylinder is removed and not used for a long time, pay attention to the surface rust prevention. Dust-proof blocking caps should be added at the intake and exhaust ports. Due to the high precision of product production and guidance, please do not remove the cylinder fixing block or cylinder head by yourself.
-
Model table method
-
Product recommendation